Zapier vs Make: Automate Social Posts in 5 Steps

Zapier vs Make: How to Automate Social Media Posts in 5 Steps

Last updated: November 16, 2026

If you want the checklists and templates I use for this, they are collected on one page: the free automation toolkit. No email required.

Zapier vs Make: Automate Social Posts in 5 Steps

Both Zapier and Make connect your content source to a social scheduler without code. The 5-step flow below works with either tool: pick a source (Google Sheets or RSS), filter the row, format the post, route it to a scheduler like Buffer, and add an approval gate before anything goes live.

The honest difference between the two tools is execution model. Zapier runs steps in a straight line, one after another. Make shows you a visual canvas where you drag modules and branch paths. If you are setting up one workflow and never want to look at it again, Zapier is faster to configure. If you are building something that splits across platforms or loops through a list of posts, Make handles that logic more naturally.

Zapier vs Make at a Glance

Criterion Zapier Make
Interface Linear step editor Visual canvas
Learning curve Low Medium
Branching / loops Limited without premium Built-in on free tier
Free tier operations Limited Zaps, single-step 1,000 ops/month, multi-step
Native social apps Large library Slightly smaller library
Best for Single-trigger, simple chains Multi-platform, conditional logic

Our pick: Make, because the free tier supports multi-step scenarios with branching, which is exactly what a social post workflow needs once you add an approval step or post to more than one platform. If your team already uses Zapier for other automations and you need social posts as one more Zap, stay on Zapier; there is no reason to switch.

For either tool, the workflow structure is the same. Here it is in five steps.

Step 1: Set Up Your Content Source

Keep one row per post in Google Sheets with the text, link, image URL, platform target, and a “Status” column set to “Ready”. In Zapier, the trigger is Google Sheets → New or Updated Spreadsheet Row. In Make, it is Google Sheets → Watch Rows. Both fire when a row changes.

The practical detail most guides skip: set the trigger to watch only rows where Status equals “Ready”. Without that filter, the trigger fires on every edit, including when you correct a typo two days after scheduling. In Zapier, add a Filter step immediately after the trigger. In Make, add a Filter module on the route before anything else.

One concrete issue with this setup: Google Sheets triggers in both tools poll on a schedule rather than reacting instantly. Zapier’s free tier polls every 15 minutes. Make’s free tier polls every 15 minutes by default as well. If you need faster pickup, you either upgrade or switch the source to something webhook-native like Airtable with a webhook trigger.

Step result: Your tool knows which rows contain posts that are ready to send.

Step 2: Format the Post for Each Platform

A post for LinkedIn needs different character treatment than one for X (Twitter). The simplest fix is to add a Formatter step. In Zapier, use Formatter → Text → Truncate to cap at the platform’s limit. In Make, use a Text function inside a Set Variable module.

Do not skip this step and assume the scheduler will handle truncation silently. Buffer will accept text over the limit and then fail at posting time, logging an error that is easy to miss if you do not have notifications set up. The error appears in Buffer’s post queue as a red flag, not in your automation tool’s history.

If you post to multiple platforms, branch here. In Make, use a Router module to send LinkedIn copy down one path and X copy down another. In Zapier, this requires either Zapier’s Paths feature (paid) or two separate Zaps triggered by the same sheet row.

Step result: Each platform gets text formatted to its own limits, not a single generic string.

Step 3: Attach the Image

Both tools pull the image URL from your spreadsheet column and pass it to the scheduler. In Zapier, map the Image URL field in the Buffer action directly. In Make, do the same inside the Buffer module’s image field.

The part that breaks silently: if the image URL is a Google Drive share link rather than a direct file URL, Buffer cannot fetch it. Drive share links return an HTML page, not an image file. The fix is to store images in a public folder (Cloudflare R2, S3, or even a public Dropbox folder) and paste the direct download URL into your sheet. Alternatively, add a step before Buffer: in Make, use the HTTP → Make a Request module to download the file and pass it as binary data. In Zapier, the equivalent is an Upload File step via a storage integration.

This is not a hypothetical edge case. It happens on the first real post after a successful test, because tests often use images that happen to be accessible, while production images live in Drive.

Step result: Buffer (or your chosen scheduler) receives the image as a usable file, not a broken link.

Step 4: Add an Approval Gate Before Posting

Fully automated posting removes the human check. That is fine for evergreen content you have already reviewed. For anything time-sensitive or tied to a campaign, add an approval step.

The practical way to do this: in Zapier, use the Email or Slack action to send yourself a digest of the pending post, then use a webhook or a second Zap triggered by a form response to continue the workflow. In Make, the cleaner option is to use the Slack module to send a message with an Approve/Reject button (Slack’s Block Kit interactive components), then use a webhook listener in Make to catch the response before the Buffer post fires.

According to the Latenode social media tools roundup, Buffer’s Essentials plan is $5 per channel per month on annual billing, which adds unlimited scheduled posts per channel and advanced analytics after a 14-day free trial (source: latenode.com, 2026-09-16). The Team plan is $10 per channel per month on annual billing and adds content approval workflows natively. If your approval workflow feels complicated to wire through Zapier or Make, upgrading to Buffer Team moves the approval step inside Buffer itself.

Step result: No post goes live without a review, and the automation does not silently queue something wrong.

Step 5: Log the Result and Update the Sheet

After Buffer queues the post, write the outcome back to your Google Sheet. Change the Status column from “Ready” to “Queued” and add a timestamp. In Zapier, add a Google Sheets → Update Row step at the end of the Zap. In Make, add a Google Sheets → Update a Row module after the Buffer module.

Why bother? Because without this step, you cannot tell from the sheet whether a row was processed or just never triggered. After a week, you will have no clean way to audit what went out and what stalled. The log also prevents double-posting: if the trigger fires twice on the same row (which Zapier occasionally does during polling overlaps), the second run sees Status is already “Queued” and your filter from Step 1 stops it.

Add a second column for errors: if the Buffer step fails, write the error message from the automation tool into an “Error” column in the sheet. Both tools expose the error text as a variable you can map. This turns a silent failure into something visible the next time you open the spreadsheet.

Step result: Your spreadsheet is a live log of what was sent, when, and whether anything failed.

Where Zapier and Make Diverge on This Exact Workflow

The five steps above work in both tools, but the experience differs at steps 2 and 4. Branching at step 2 (platform-specific formatting) costs nothing extra in Make and requires a paid Zapier plan if you want it in a single Zap. The approval gate at step 4 is easier to wire in Make because the Router and webhook listener work together without extra paid features.

According to the socialmate.studio comparison (May 2026), both Make and Zapier connect your blog, e-commerce store and social scheduler, and the core question is execution model, not connector availability. That matches what shows up when you actually build this: connector availability is rarely the problem; logic and branching are.

The note.com review (October 2026), which builds the same side-hustle automation in both tools, reaches a comparable conclusion: Zapier is faster to get working on a straight-line trigger, and Make rewards the extra setup time once the workflow needs conditional logic or multi-step branching.

If you are already paying for Zapier for other business automations, adding this workflow there is reasonable, you are not missing a critical feature, just paying for Paths. If you are starting fresh specifically for social scheduling, Make’s free tier is the more practical starting point.

The AI Automation Playbook for This Stack

The five-step workflow above is documented as a reusable template in the AI Automation Playbook (available on Etsy at CA$32.99 and on Gumroad at $19.00), which covers 51 no-code and low-code workflows for marketing, sales, and operations, including this exact Google Sheets → Formatter → Buffer chain with the approval variant. The Client Onboarding Automation Kit ($19.00 on creatifystore.com) includes n8n versions of similar workflows if you prefer a self-hosted option over Zapier or Make.

Building this once and running it for a year is worth the setup time. The alternative is opening Buffer manually every time, which is fine for two posts a week and unsustainable for ten.

🛒 Recommended resources

Dev Studio OS — Notion Template for Freelance Devs & Studios

OPTIONAL CUSTOM AGENT INSTRUCTIONS: The template includes three instruction sets for CRM triage, weekly review, and i…

Gumroad

AI Multi-Agent Blueprint for Developers | Python + FastAPI Starter Code, 53-Page Guide

Use a 53-page blueprint and a runnable Python + FastAPI starter service to study and adapt a multi-agent architecture. T…

Gumroad

AI Emoji Prompt Freebie Pack — 5 Free Prompts for Unique Emojis (Midjourney, DALL·E, Bing)

Tired of generic emojis?
Unlock your creativity with 5 unique AI prompts to generate beautiful, custom emoji icons…

Gumroad

Dev Studio OS — Notion Template for Freelance Devs & Studios

AI Multi-Agent Blueprint for Developers | Python + FastAPI Starter Code, 53-Page Guide

Sources

📚 Related Articles

Get the free AI Automation Starter Kit

Ready-to-use workflows and prompts I actually run in a live, 24/7 AI-automated business — no fluff, instant access.

Grab it free →

🚀 Level Up Your AI Game

Get weekly AI tools, prompts & automation strategies — free, every week.

No spam. Unsubscribe anytime.

Stay in the Loop

Get notified about new tools, templates, and automation tips. No spam, ever.

Follow us across the web

@

All hubs · andriiklymenko.carrd.co